Pulse Formers
GZ9010NA-50
Non-Linear Pulse Amplifier (Pulse Former) GZ9010NA-50 recommended as driver for triggering of Pulse Generators or other units, that require different trigger signal with amplitude or duration, than has customer trigger source.May be used together with PGM GZ1105DLP-3.
Number Of Channels 1
Output Waveform Positive Pulse
Output Amplitude Into 50 Ohm Nominal (1,5 ÷ 10) Vfixed during order
Rise Time 20 80 No More 2,0 ns
Technical Specification
Technical Specification
| Number of channels | 1 |
|---|---|
| Output Waveform | Positive Pulse |
| Output amplitude into 50 Ohm, nominal | (1,5 ÷ 10) Vfixed during order |
| Rise time, (20/80)%, no more | 2,0 ns |
| Fall time,(20/80)%, no more | 2,0 ns |
| Pulse width, nominal | 9 ns, fixed |
| Front Jitter (rms), no more | 3 ps |
| Ringing p-p, no more | 0,15 x Amplitude |
| Input signal | voltage low level 0 V voltage high level (0,5÷5,0) V/50 Ohm rise time 2,5 ns max duration 5 ns min |
| Max Pulse Repetition Frequency | 50,0 MHz |
| Impedance, nominal | 50 Ohm |
| Type of HF Connectors | SMA socket |
| Temperature Range | (+5÷+35)°:C Temperature of gase |
| Consumption current, no more (measured at PRF max) | 500 mA @12 V |
| Power Supply | DC +(12,5 ± 1,5) V |
Diagrams
Waveforms and Diagrams
Related Products
More from Pulse Formers
Migrated
GZ9010NA
GZ9010NA is a pulse amplifier for Geozondas measurement, radar, and RF integration workflows.
Migrated
GZ9011NAR
GZ9011NAR is a pulse amplifier for Geozondas measurement, radar, and RF integration workflows.
Migrated
GZ9010NA/16CH
GZ9010NA/16CH is an RF support component for Geozondas measurement and radar workflows.